Streaks on windows usually have three causes: cleaning product residue, minerals from the water that stay on the glass once it dries, and water that dries before you squeegee it off. I’ll explain why streaks form, how we clean windows inside and out, and which home remedies really work.
Quick answer: Use little product, clean in the shade or when it’s cloudy, and squeegee the water off the glass before it dries. Dry the edges and corners with a dry microfibre cloth. Outside, we clean windows with demineralised water, which leaves no minerals on the glass once it dries.
Why do windows still have streaks after washing?
A streak is almost always something left on the glass after the water has dried. The only question is what it was: cleaning product, minerals from the water, or dirt the water didn’t manage to carry away.
Has cleaning product been left on the glass?
Too much product, or water that wasn’t properly squeegeed off the glass, leaves a thin film. In the light it then shows up as streaks. In a discussion on the Slovak forum Modrý koník, someone described how a cleaning product left a greasy film on their windows and they had to wash them again. A simple rule applies: less product and more clean water is better.
Can hard tap water cause streaks?
Yes. Water hardness is the sum of calcium and magnesium, according to the Regional Public Health Authority in Banská Bystrica. When water dries on glass, these minerals stay there. In our test, tap water had 348 ppm of dissolved substances and demineralised water 0 ppm. You’ll find the whole test in the article Pure water cleaning: what it means to clean windows and solar panels with demineralised water.
Why shouldn’t you clean windows in direct sunlight?
In the sun, the glass warms up and the water with the product dries before you have time to squeegee it off. Streaks and marks are then left on the glass. Professional glass cleaning guidelines also advise against cleaning tinted and reflective glass in direct sunlight. It’s best to clean in the shade or when it’s cloudy.
What if the spots don’t go even after washing?
If white spots or marks stay on the glass even after thorough washing, they’re probably not streaks but limescale. Ordinary washing won’t remove it. I explain how to recognise it and remove it safely in the article Hard water stains on glass.
What do you need to keep a window streak-free?
You don’t need many things to clean a window without streaks. What matters more is that they’re clean and in good condition.
| Tool | What it’s for | What to watch out for |
|---|---|---|
| Strip washer or sponge | Wets the glass and loosens the dirt | Wring it out so it doesn’t drip onto the frame and sill |
| Squeegee | Removes the water and the dirt from the glass | The rubber must be straight and undamaged, otherwise it leaves lines |
| Two microfibre cloths | One for the frame and dirt, the other dry for edges and corners | Don’t use the dry cloth on dirt |
| A bucket of water | Water for washing | Add only a little product to the water |
| A soft brush or vacuum | Dust and grit from the frame, grooves and sill | Remove the grit first so you don’t scratch the glass with it |
| A gentle frame cleaner | Cleaning the frame and seals | A neutral cleaner, not an abrasive one |
What not to use on windows: the window manufacturer Slovaktual recommends neutral cleaners with a pH of 6 to 8 for frames in its care instructions. It prohibits abrasive creams, cream cleaners and rough sponges, and advises against cleaners with bleach, alcohol, petrol or thinners. Never use razor blades on coated glass.
How do you clean a window from the inside, step by step?
The method we recommend to you too. In steps 3 to 6, I describe how we clean windows from the inside.
- Dust first. Sweep or vacuum dust and grit from the frame, grooves and sill so you don’t smear them across the glass while washing.
- Frame and seals. Wash them with a soft cloth and a gentle neutral cleaner.
- Wet the glass. Wash the glass from top to bottom with a strip washer. We use a strip washer with a degreaser, which loosens grease and fingerprints.
- Wash the glass with window cleaner. We use the professional window cleaner Maykker Orange Krush, which is diluted with water.
- Squeegee the water off. Use the squeegee to bring the glass to a clean shine. Pull smoothly, without stopping in the middle of the glass.
- Dry the edges. Dry the corners and edges the squeegee can’t reach with a dry microfibre cloth.
- Check the glass against the light. You’ll see streaks best when you look at the glass at an angle against the light.
- Finally, the sill. The water from the squeegee ends up on the sill, so wipe it last.
Inside: squeegee and shine down to the last corner
Inside, we first wet the glass with a strip washer with degreaser. Then we wash it with a professional window cleaner and squeegee the water off to a clean shine. We dry the edges with a microfibre cloth.
In the video, we’re cleaning a window from the inside in Nová Dedinka. The owners maintain their windows regularly there and a robotic cleaner washes them too, so we went into detail. You’ll find the whole process in our Nová Dedinka project.
Squeegee, microfibre cloth, newspaper or window vac: what works best?
Each method has its place. These are their main pros and cons:
| Method | Pros | Cons |
|---|---|---|
| Squeegee | Quickly removes water and dirt, irreplaceable on large panes | Takes a bit of practice, water runs onto the sill |
| Microfibre cloth | Simple, suitable for smaller windows, edges and corners | Slower on large panes and needs changing often |
| Newspaper | Always to hand | Leaves dust, and the glass can look less clean afterwards |
| Window vac | Sucks up the water, so there’s less dripping | Edges and corners still need drying with a cloth |
Clean in the shade and have two cloths
We agree. In the sun, water dries too quickly. One cloth for the dirt and a dry one for drying off is a good basis.
Microfibre and clean water are enough
For a slightly dirty window, yes. But with hard water, minerals can stay on the glass, so always squeegee or dry the water off.
Do vinegar, alcohol or washing-up liquid help when cleaning windows?
Vinegar is the most common home remedy. The glass manufacturer Pilkington gives a mixture of one part vinegar to one to ten parts clean water in its care instructions for its self-cleaning glass. For this glass, it also advises against squeegees, razor blades and scouring pads. Vinegar is acidic, so don’t leave it on frames and seals; they need a neutral cleaner.
Alcohol shouldn’t be used on frames; window manufacturers advise against cleaners containing alcohol.
Washing-up liquid helps with grease, but you really only need a little. Too much washing-up liquid is one of the most common causes of streaks. We use a degreaser for grease and fingerprints and a professional window cleaner on the glass itself.
Why do professionals clean windows with demineralised water?
For pure water cleaning, the water should contain as few dissolved substances as possible. The GANA and IWCA associations, in their bulletin on cleaning architectural glass, give a maximum of 20 ppm and consider tap water unsuitable for it. The professional equipment manufacturer Unger recommends a maximum of 10 ppm. Our demineralised water has 0 ppm, so once it dries there’s nothing for it to leave on the glass.
Outside, though, we don’t have one method for every window. It depends on whether the sun is shining or beating down, how fast the glass dries, whether it’s windy and how dirty the window is. Sometimes we squeegee outside windows too: when we clean them in several passes and check for streaks, or in strong sun so they don’t dry too quickly. But we always finish outside windows with a rinse of demineralised water.
We adapt the water temperature to the surface; on glass we use warmer water.
Windows a robot had already cleaned
In Nová Dedinka, a robotic cleaner washes the windows roughly every two weeks. Our job was to clean them so the difference showed even on clean windows.
On the outside, we washed the windows with demineralised water, which leaves no streaks or marks once it dries. The owners were delighted.
View projectHow often should you clean windows, and when is the best time?
For routine maintenance, cleaning the glass twice a year is usually enough. With heavier dirt, for example under conifers or after construction work, it needs doing more often. Frames should be washed at least once a year, and rubber seals washed with washing-up liquid once a year and treated with silicone oil to keep them supple.
A cloudy day or the side of the house in the shade. The water doesn’t dry too quickly and you have time to squeegee it off.
Direct sunlight, strong wind and frost. Wind and sun dry the glass before you can finish cleaning it.
When is it worth calling in the professionals?
Most people clean ordinary ground-floor windows themselves. Help is worth it especially for:
Streak-free window cleaning
We clean windows on family homes around Bratislava, Senec, Pezinok and Šamorín. This is what it looks like in practice:
- outside with warm demineralised water, always finishing with a pure water rinse
- inside with a strip washer, professional window cleaner and a squeegee
- first-floor windows and roof windows
- on request, external blinds and window sills too
Frequently asked questions
Why do my windows have streaks after cleaning, even though I use window cleaner?
Most often because of too much product, water that dried on the glass before you squeegeed it off, or minerals from hard water. Use less cleaner, clean in the shade and squeegee the water off.
Can I clean windows with vinegar?
Diluted vinegar is used on glass, for example one part vinegar to one to ten parts water. But it’s acidic, so don’t leave it on frames and seals; they need a neutral cleaner.
Why isn’t newspaper recommended for windows?
Newspaper leaves dust, and the glass can look less clean afterwards. You’ll get better results with a squeegee and a dry microfibre cloth.
Can I clean windows when the sun is shining?
Better not. In the sun, the glass warms up and the water with the product dries before you squeegee it off. Clean in the shade or when it’s cloudy.
Does distilled or demineralised water help?
Yes. Water without minerals leaves no white spots on the glass once it dries. Our demineralised water has 0 ppm; tap water in our test had 348 ppm.
How often should windows be cleaned?
For routine maintenance, usually twice a year, and more often with heavier dirt. Frames at least once a year, and seals washed with washing-up liquid once a year and treated with silicone oil.

Want streak-free windows without the effort?
Send us a few photos and we’ll prepare a quote. It’s always the two of us who come, husband and wife Betka and Patrik. Bratislava, Senec, Pezinok, Šamorín and the surrounding area.
Message Patrik on WhatsAppSources
- GANA/IWCA: Proper Procedures for Cleaning Architectural Glass Products (FB01-00, 2016)
- Unger: The 16 most common mistakes in pure water cleaning
- Slovaktual: Návod na obsluhu a údržbu hliníkových okien a dverí (2024, in Slovak)
- Pilkington: Maintenance and Hand Cleaning of Pilkington Activ Self-Cleaning Glass (ATS-166)
- RÚVZ Banská Bystrica: Tvrdosť pitnej vody vo verejných vodovodoch (in Slovak)
- Modrý koník: Čím umývate okná, aby sa leskli a neboli šmuhavé? (in Slovak)
- Gutt.sk: our test of 6 types of water in ppm
The Gutt.sk blog
Read more articles
Hard water stains on glass: why they form and how to remove them safely from windows
White spots and marks on your windows that won't go even after washing? We explain where limescale on glass comes from, how…
Read article
Gutters in autumn: what happens when they get blocked and how to clean them
Leaves and pine needles in your gutters aren't just a cosmetic problem. We explain what a blocked gutter causes, how to tell…
Read article
Pure water cleaning: what it means to clean windows and solar panels with demineralised water
Why doesn't demineralised water leave spots on glass? We measured 6 types of water in ppm and explain TDS, hardness and how…
Read article